Connecting Power and Cameras
The RedAlert is capable of receiving images from one wired camera and one
wireless camera at a time (though it can not record both simultaneously).
To attach a camera:
1.
Plug the camera into power using the supplied power adaptor (12V).
2.
If your camera is the wired
on the back of the RedAlert. Attach the RCA connector from the PNP-50 to
the RCA connector on the Video In cable.
3.
If your camera is the
See the camera's manual for details on how to do this. Using the SET button,
select the camera channel on the RedAlert.
Attaching the RedAlert to a Television
To connect the RedAlert to a television:
1.
Be sure you've already connected the
power adaptor (5V).
2.
Using the supplied RCA video out cable, attach the AV OUT on the back of the
RedAlert to an AV INPUT on the back of your television.
Tips and Tricks: Be sure to plug the RCA connector into a VIDEO INPUT on the
back of your TV (or front, if your TV has them there). The video input (as opposed
to audio) is usually color-coded yellow. Also, watch out for VIDEO OUTPUTS, which
many TVs come with.
8 8 8 8
PNP-50, connect the Video In cable to the AV input
Wireless Camera, set the camera channel as appropriate.
RedAlert to power using the supplied