Service Record Chart - Meridian TITAN SR2 Operator's Manual

10.15 SERVICE RECORD CHART

Thechartonthefollowingpageshouldbecopiedandfilledoutasmaintenanceisperformedonthemachine.Refer
to the Lubrication, Maintenance, and Service sections for additional instructions.
Date
Serviced by
8 hours or daily
Check Engine Oil Level
Check Reduction Case Oil Level
Check Hydraulic Oil Level
Test Break-Away Brake System
Inspect Tires
50 Hours or Weekly
Check Tire Pressure
50 Hours
Change Reduction Case Oil*
Clean Engine Air Intake Filter
100 Hours
Change Engine Oil*
200 Hours or Semi/Annual
Adjust Brakes
Inspect Brake Magnets
Battery - Make sure strap is securely
holding battery onto frame, check
electrolyte levels in the cells, and clean
terminals to remove any dirt or corrosion.
400 hours or annually
Change Hydraulic Oil
Check Wheel Bolt Torque (90-120 ft-lbs.)
Check Frame Hold-Down Bolts (40 ft-lbs.)
Check Trailer Hitch Bolts (45 ft-lbs.)
Check Axle/Frame Bolts (290 ft-lbs.)
Inspect Brake Lining Wear and Brake
Wiring
Repack Wheel Bearings and Check Hub for
Wear
Inspect Axle Grease Seal
Inspect all electrical wiring connections for
looseness or corrosion. Tighten and/or
seal, as necessary.
Thoroughly Clean Machine
*As per OEM instructions.
52