Connecting
5.3 Electrical configuration of the ET 200AL
5.3
Electrical configuration of the ET 200AL
Electrical isolation
When electrically configuring the ET 200AL distributed I/O system, there is electrical isolation
between:
● Load voltage 2L+ and all other switching parts
● Communication interfaces (PROFINET/PROFIBUS) of the interface modules and all other
switching parts
● ET-Connection and all other switching parts
The following images show the potential conditions of the modules of the ET 200AL
distributed I/O system.
Figure 5-2
30
Potential conditions of the ET 200AL distributed I/O system (Part 1)
Distributed I/O system
System Manual, 08/2019, A5E31861578-AG