Table of Contents
Advertisement
C
HAPTER
If you encounter problems with your scanner, please review the installation and
scanning instructions contained in this guide.
Before you ask for customer service or repair, please refer to the information in this
chapter and consult our FAQ (Frequently Asked Questions) in which you can find
useful self troubleshooting information. From the Windows START menu, point to All
Programs > Your Scanner Model Name, and then click FAQ. (For Windows 8.1 users:
Point your mouse cursor to the upper or lower right corner of your screen to open the
Charm bar. Click on the Start charm, then click on the downwards arrow button in the
lower left corner of the screen. The Apps screen will be shown. Move your cursor to
the right edge of the screen to scroll right until you find Your scanner model name,
and then click on FAQ.)
S
C
CANNER
ONNECTION
The first step to take when troubleshooting connection problems with your scanner
is to check all physical connections. The icon
tray, indicates if the scanner software is properly launched and the scanner and
computer are communicating with each other.
Appearance
No Display
IV. T
ROUBLESHOOTING
The program has been successfully launched and the scanner
is connected with the computer, ready to scan images.
The scanner is not connected with the computer. Or, the
scanner power is not switched on. Or, the scanner is in
standby mode.
You have chosen to terminate the program, no matter the
scanner is connected or disconnected with the computer.
, located on the Windows system
Status
26
Advertisement
Table of Contents
