Table of Contents
Related Manuals for Bose RoomMatch Utility RMU108
Summary of Contents for Bose RoomMatch Utility RMU108
- Page 1 RMU108 RMU206 RMU105 RMU208 RoomMatch Utility ® Small-Format Foreground/Fill Loudspeakers Installation and Safety Guidelines Instrucciones de instalación y de seguridad Installation et instructions de sécurité Installations- und Sicherheitshinweise...
-
Page 2: Important Safety Information
Obtain all mounting system components from reputable manufacturers. Select a mounting system appropriate for your loudspeaker system and its intended application. We recommend Bose mounting accessories when available. A licensed professional engineer must review the design and fabrication of any custom mounting hardware. -
Page 3: Common Features
RoomMatch Utility (RMU) small-format loudspeakers are intended for use in high-quality foreground music, under-balcony, zone fill, ® and vocal-range floor monitor applications. The design features a single Bose EMB2 compression driver to provide mid/high frequency ® voicing similar to that of RoomMatch full-range array modules. - Page 4 Introduction pro.Bose.com Loudspeaker and U-Bracket Dimensions Figure 2. RMU208 loudspeaker and U-bracket dimensions Figure 3. RMU206 loudspeaker and U-bracket dimensions 22.7” (577 mm) 3.1” (80 mm) 8.0” (203 mm) 5.8” (146 mm) 9.7” (246 mm) 9.8” (250 mm) 11.1” (282 mm) 7.1”...
-
Page 5: Connector Panel
Introduction pro.Bose.com Figure 5. RMU105 loudspeaker and U-bracket dimensions Connector Panel The connector panel is identical for all models and includes dual NL4 connectors, to allow “loop through” connections, and a screw- terminal barrier strip. Figure 6. RMU speaker input connectors... -
Page 6: Installation
Installation pro.Bose.com Mounting RMU Loudspeakers with U-Bracket Before You Begin – Recommended Tools • 10 mm sockets and socket wrenches – for M8 bolts on U-bracket • T3 square drive (included) – for removing plastic inserts CAUTION: The RMU loudspeakers can weigh up to 43 lbs (19.5 kg) with U-brackets attached. Use caution when lifting to avoid injury and/or damage to the speaker. - Page 7 Installation pro.Bose.com Rotating the High-Frequency Waveguides The high-frequency waveguide in the RMU208, RMU206, and RMU108 loudspeakers can be rotated to provide the desired coverage pattern for horizontal or vertical speaker mounting. These speakers are assembled in the factory for horizontal mounting. To rotate the waveguide for vertical mounting, do the following.
- Page 8 Installation pro.Bose.com RMUXF40/RMUXF100 70V/100V Transformer Kit Accessory The 70V/100V transformer kit is available in 40-watt and 100-watt versions. Both versions fit all RoomMatch Utility models, after removing the standard connector panel. Model Description Product Codes RMUXF40W 40W 70V/100V Transformer Kit...
- Page 9 RMUBRKT1 RMU Pan-and-Tilt Bracket Accessory The RMUBRKT1 pan-and-tilt wall bracket (Figure 12) allows both pitch and yaw adjustment and is available from Bose. The bracket fits the threaded inserts on the rear panel of loudspeakers. CAUTION: Two lengths of M8 pan head screws are included. Use only the M8 x 20mm screws for attaching the bracket to RMU speakers.
- Page 10 Installation pro.Bose.com Using the included T3 square drive, remove the plastic inserts on the rear panel of the loudspeaker and attach the bracket to speaker using only the included M8 x 20mm screws. M8 x 20mm Hang the speaker on the wall-mounted half of the bracket and install the lower carriage bolt removed earlier.
-
Page 11: Recommended Amplifier
DSP for RoomMatch Utility loudspeakers. ® ® Please refer to the specifications listed on the pro.bose.com website for PowerMatch amplifiers and compare with the table above to determine which PowerMatch model is best for your particular RoomMatch Utility system design. 14 English... -
Page 12: Recommended Signal Processing
Installation pro.Bose.com Recommended Signal Processing Digital signal processing (DSP) equipment is required for infrasonic protection and amplifier power limiting functions. This processing is available in optional products from Bose such as the PowerMatch amplifiers and/or ControlSpace DSP hardware. ® ®... -
Page 13: Additional Resources
Bose GP, Castleblayney Road, Carrickmacross, County Monaghan, Ireland China Bose Electronics (Shanghai) Company Limited, Part C, Plan 9, No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone Taiwan Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan... - Page 14 ©2016 Bose Corporation. All rights reserved. The Mountain, Framingham, MA 01701-9168 USA www.pro.Bose.com All trademarks are the property of their respective owners. AM738637 Rev. 02...