Simplicity Broadmotor Series Service & Repair Manual page 79

Battery not charging:
Check battery.
Component Tests OK
Check ground.
Component Tests OK
Check circuit breaker.
Component Tests OK
Check voltage regulator.
Component Tests OK
Check charging voltage.
Component Tests OK
Check engine alternator.
Component Tests OK
Check ignition switch.
Done
Safety interlock malfunction:
Refer to "Engine Will Not Turn Over"
Refer to C. Battery Tests.
Refer to B. Check/Clean
Ground Cable.
Refer to O. Circuit Breaker
Test.
Refer to Engine Manual.
Refer to E. Charging
Voltage Check.
Refer to Engine Manual.
Refer to G. Ignition Switch
Tests.
7 - 23
7 Electrical System Service
Troubleshooting Charts
Component
Fails Test
Replace the battery.
Component
Fails Test
Clean both ends of the
negative battery cable.
Component
Fails Test
Replace the circuit
breaker.
Component
Fails Test
Replace the defective
engine component(s).
Component
Fails Test
Replace the defective
engine component(s).
Component
Fails Test
Replace the defective
engine component(s).
Component
Fails Test
Replace the ignition
switch.