Suunto X9_en. Instruction Manual page 49

enough, the location is updated automatically. You can also press ENTER to
manually update the location before the EPE is small enough for the automatic
marking. However, this way the updating will be less accurate.
Erasing a route
To erase a route:
1. In the Set menu, scroll to Route and press ENTER. The
route list is displayed.
2. Select the route you wish to erase with UP/DOWN and
press ENTER.
3. scroll to Erase and press ENTER. Suunto X9 asks you to
confirm the action.
4. Press ENTER to confirm the action. Suunto X9 displays the
message '
ERASING ROUTE
Route menu.
Erasing waypoints
To erase a waypoint:
1. In the Set menu, scroll to Route and press ENTER. The
route list is displayed.
2. Select a route with UP/DOWN and press ENTER. A list of
waypoints is displayed.
3. Select a waypoint with UP/DOWN and press ENTER. The
waypoint menu is displayed.
4. Scroll to Erase in the waypoint menu and press ENTER.
Suunto X9 displays the message '
5. Press ENTER to confirm the action or STOP/BACK to keep
the waypoint. You return to the waypoint list.
', after which you return to the
ERASE WAYPOINT
?'.
47