Presetting The Displays In The Gauge Mode - Suunto D3 User Manual

- buttons to increase and decrease the O
shown on the display.
5.While the PO level is selected, press the + and - to increase and decrease the
2
PO level. Pressing S again returns to O
2
6. After you have calculated the Maximum Operating Depth, exit the MOD plan-
ner by pressing the M button briefl y. Keeping the M button down turns on the
light.
3.3.2. PRESETTING THE DISPLAYS IN THE GAUGE
MODE
Preset with the - button in the lower left corner of the display (Fig. 3.5.):
• the maximum depth or
• the temperature.
Preset with the + button in the lower right corner of the display (Fig. 3.5.):
• the dive time or
• the current time.
% level. The corresponding MOD is
2
% selection.
2
29