Table of Contents
Advertisement
INSTALLATION
3. Start with the front left side mounting hole
Repeat process for the front right side mounting hole
fastener securely.
The rear cowling is pliable, the easiest process for lining up the rear fastener
mounting holes of the skid frame with the cowling holes is to pull out on the
bottom most part of the cowling in the middle of the molding. This will pull the
rear hole in the cowling forward allowing you to line up the holes to insert the
4. Repeat this process for both left
5. Check to ensure all tools are accounted for and all steps have been
completed in the proper order.
66
A
NOTE
nylon rivet fastener.
C
then right
. Insert nylon rivet fastener
B
, inserting nylon rivet
D
rear mounting holes.
w
.
Advertisement
Table of Contents
