Table of Contents
Advertisement
INSTALLATION
2. Place the Ski Rubber
"Front" of the Ski Rubber towards the front tip of the Ski.
3. Place the lower portion of the Spindle
ski saddle to where the Fork Clamp support bracket would be positioned
behind the front forks of the bike. Line up the bottom bolt hole and insert the
M 10 x 155 mm bolt
t
Apply nut
to bolt and torque to specification listed below.
62
w
on top of the center of the ski
r
.
TORQUE
45 Nm (33 Ft. Lbs)
q
e
on top of the Ski Rubber
with the indicated
w
in the
Advertisement
Table of Contents
