Updating The Dell Firmware; Running The Firmware Update By Double-Clicking - Dell MARVELL QLogic QLE2660-DEL User Manual

3–Fibre Channel Configuration

Updating the Dell Firmware

NOTE
For information on configuring the Fibre Channel Adapter using VMware
vCenter Server, refer to the User's Guide—QConvergeConsole Plug-ins for
VMware vSphere (part number SN0054677-00), available at:
www.marvell.com.
Updating the Dell Firmware
The firmware Dell Update Package (DUP) is a Flash update utility only; it is not
used for adapter configuration. To run the firmware DUP, double-click the
executable file. Alternatively, run the firmware DUP from the command line, which
supports several command line options.
NOTE
If you update the firmware using the DUP with the Integrated Dell Remote
Access Controller (iDRAC) or Lifecycle Controller (LC), it shows FFV as the
QLogic Fibre Channel adapter MBI version. This issue occurs only the first
time that you run the firmware DUP; following a reboot, FFV will be shown
correctly on subsequent firmware updates with the DUP.

Running the Firmware Update by Double-Clicking

For additional information, refer to the Dell Update Packages Version xx.xx.xxx
User's Guide, "Using Dell Update Packages" section.
To run the firmware DUP by double-clicking the executable file:
1. Double-click the icon representing the firmware DUP file.
32 CU0354604-00 P