Installation; Cleaning And Maintenance - Teka MS 620 BIS User Manual

Installation


The electric system must be equipped with a means for
disconnection, with a contact separation in all poles that
provides full disconnection under overvoltage category III.

If a plug is used for the electric connection, then it must be
accessible after installation.

The installation must comply with current regulations.

Protection against electric shock must be provided by the
electrical installation.

WARNING! The oven must be earthed.

WARNING! The appliance is intended to be built in. Please
refer to the last pages of this user manual for detailed
information on the installation dimensions.

Cleaning and Maintenance


WARNING! Cut the power supply before cleaning and
maintenance.

The appliance should be cleaned regularly and any food
deposits removed.

Failure to maintain the appliance in a clean condition could
lead to deterioration of the surface that could adversely
affect the life of the appliance and possibly result in a
hazardous situation.

Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.

Do not use a steam cleaner to clean the appliance.

The door contact surfaces (the front of the cavity and the
inside part of the doors) must be kept very clean in order to
ensure the oven functions correctly.
EN
7