Removing And Installing; Celsius W570 / W570Power And W580 / W580Power: According To The Operable; Drive, Fujitsu Workstation Celsius W570Power+ / W580Power+: On The Drive Frame) - Fujitsu CELSIUS W570power Operating Manual

It may be necessary to modify the entry for the drive in the BIOS Setup.

Removing and installing 2

Solid State Discs (SSD) (FUJITSU Workstation
CELSIUS W570 / W570power and W580 / W580power:
according to the operable 5
FUJITSU Workstation CELSIUS W570power+ /
W580power+: on the drive frame)
The procedure is identical for all three device variants and for both installation kits of
the FUJITSU Workstation CELSIUS W570power+ / W580power+ Only the position
in the casing is different (see
The device variant described below is the FUJITSU Workstation
CELSIUS W570power+. / W580power+
For installation in this model, only use the EasyChange rails designed for this
slot. If no suitable drive has already been installed at the time of delivery,
these rails will already be pre-fitted in the slot.
Fujitsu
/ inch hard disks or
1
2
/ inch drive,
1
4
"Overview of the hard disk drives", Page
System expansions
48):
59