Table of Contents
Advertisement
Limiting the opening angle of the ap-
pliance door
The door hinges are set ex works to en-
able the door to be opened up to 115°.
If the appliance door hits an adjacent
wall when opened, for example, the
opening angle can be limited to approx.
90°:
The door opening angle limiter should
be fitted before the refrigeration appli-
ance is installed.
Fitting the door opening angle limiter
Switch off at the wall and remove the
plug from the socket, or disconnect
the mains fuse.
– Removing the soft-close mechan-
ism
Open the appliance door.
Push off right outer cover .
Remove cover from the door hinge
and cover from the soft-close
mechanism.
Click the red safety device (sup-
plied with the refrigeration appliance)
into place in the opening.
The safety device prevents the soft-
close mechanism and the hinge plate
from snapping shut.
Do not remove the red safety device
until instructed to do so.
Push the pin out of the door
hinge and remove it.
Move the hinged arm of the soft-
close mechanism away from the door
hinge.
Installation
71
Advertisement
Table of Contents
