Table of Contents
Advertisement
Setting the temperature
Touch the temperature display.
The previously set temperature will ap-
pear.
-18
°C
OK
Use the and arrows to set the
temperature higher or lower.
Touch
immediately after setting
OK
the temperature to confirm your entry.
Or wait approximately 8 seconds
after the last touch of a sensor. The
temperature will then be automatically
adopted.
Tip: The newly set temperature can also
be confirmed and adopted by closing
the appliance door.
The temperature display will then
change to the current temperature in
the appliance.
The correct temperature
Temperature range
The temperature can be adjusted from
-14 °C to -28 °C.
Tip: If you have adjusted the temperat-
ure, wait for approx. 6 hours if the ap-
pliance is not very full and for approx.
24 hours if the appliance is full before
checking the temperature display. It will
take this long for the appliance to give
an accurate reading.
If, after this time, the temperature is
still too high or too low, you will need
to adjust it again.
27
Advertisement
Table of Contents
