Table of Contents
Advertisement
MAINTENANCE
Grease pillow block bearings regularly as needed.
Check bolts and nuts for tightness every day.
Belt tension should be adjusted so that there is approximately ¾" deflection of belt when pushed down firmly
between the two pulleys.
Threaded rod on depth control should be maintained with spray lubricant periodically to keep it turning freely.
Check breather hose assembly for cracks or wear.
Keep breather hose assembly in perfect working order to minimize dust and dirt accumulation on engine.
Clean and/or wash engine frequently to keep engine "breathing" and cooling properly.
Change the oil weekly or according to engine manufacturer's recommendations.
Check blade for wear, cracks, warpage etc., replace if in doubt.
If service or repair of engine is needed, contact an authorized Honda service center.
Blade Installation
GRIZZLY roof cutters are equipped with a premium carbide roof cutting blade. Always disconnect spark plug before
changing blade. The blade requires a disc and a 1" nut to hold it in place (refer to picture below)
Make certain 1" hex nut is tightened securely so that blade won't come loose. Never operate machine with bent, broken or
damaged blade as it could cause vibration and fly apart and cause damage or injury.
©Alcor 2011 All rights reserved
9
Advertisement
Table of Contents
