Removal steps of WWAN antenna assembly
Step
Screw (quantity)
1
M2 × L3.2 mm, flat-head, nylon-coated (4)
2
M1.6 × L2.6 mm, flat-head, nylon-coated (3)
Attention: When you route the cables, ensure that they are not subject to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
1140 Speaker assembly near the built-in battery
For access, remove these FRUs:
• "1010 Base cover assembly" on page 71
• "1060 Built-in battery" on page 76
• "1130 Wireless-WAN antenna assembly" on page 83
84
X1 Yoga and X1 Carbon Hardware Maintenance Manual
Color
Torque
Silver
0.181 Nm
(1.85 kgf-cm)
Silver
0.181 Nm
(1.85 kgf-cm)