Related Manuals for Sunbeam HE3100
Summary of Contents for Sunbeam HE3100
- Page 1 Convection Plus Heaters Instruction Booklet HE3100 1200W heater with micathermic elements HE3900 2200W heater with micathermic elements Please read these instructions carefully and retain for future reference.
-
Page 2: Table Of Contents
Contents Sunbeam’s Safety Precautions Sunbeam’s Total Safety System Features of your HE3100 Convection Plus Heater Features of your HE3900 Convection Plus Heater Using your Convection Plus Heater – HE3100 Using your Convection Plus Heater – HE3900 Wall Mounting and Attaching the Wheels Care and Cleaning Important instructions –... -
Page 3: Sunbeam's Safety Precautions
Sunbeam’s Safety Precautions Sunbeam are very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance: •... - Page 4 Sunbeam’s Safety Precautions • This heater becomes hot during use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (90cm) away from the front of the heater and keep them away from the sides and rear.
-
Page 5: Sunbeam's Total Safety System
Sunbeam’s Total Safety System Safety auto shut-off Your Sunbeam Convection Plus Heater is equipped with a safety system that detects any abnormally high temperatures within the heater and automatically cuts power to the heating element, preventing overheating. Once the heater has cooled it will automatically resume normal operation. -
Page 6: Features Of Your He3100 Convection Plus Heater
Features of your HE3100 Convection Plus Heater Double heat micathermic elements The revolutionary micathermic heating elements produce both radiant and convection heat. Instant heat radiates from the large surface area in one minute, while natural convection circulates warm air around the room quickly and evenly. - Page 7 Once the selected heat level is reached, the heater will automatically cycle on and off to maintain it. Dimensions When the wheels are attached, your HE3100 Convection Plus heater is approximately: (L)620 x (W)245 x (H)510mm...
-
Page 8: Features Of Your He3900 Convection Plus Heater
Features of your HE3900 Convection Plus Heater Double heat micathermic elements The revolutionary micathermic heating elements produce both radiant and convection heat. Instant heat radiates from the large surface area in one minute, while natural convection circulates warm air around the room quickly and evenly. - Page 9 Figure 3 Dimensions When the wheels are attached your HE3900 Convection Plus heater is approximately: (L)850 x (W)245 x (H)600mm Remote control The easy to use remote control enables the heater to be operated from anywhere in the room. LED screen The LED screen displays the current settings including the ambient room temperature, the selected mode, or timer setting.
-
Page 10: Using Your Convection Plus Heater - He3100
Using your Convection Plus Heater HE3100 – 1200W heater with micathermic elements 1.Place the heater on a flat level surface and ensure that the air intake and outlet are clear of obstructions. Note: When turned on for the first time, your new heater will emit a slight odour for up to 8 hours. -
Page 11: Using Your Convection Plus Heater - He3900
Using your Convection Plus Heater continued HE3900 – 2200W heater with micathermic elements and remote control 1.Place the heater on a flat level surface and ensure that the air intake and outlet are clear of obstructions. (Refer to Note on Page 8). 2.Ensure that the ON/OFF switch is in the OFF position. - Page 12 Using your Convection Plus Heater continued 3.Use the plus/minus arrows to select your desired setting. The LED screen will flash the set value for 5 seconds. After 5 seconds the LED screen will display the ambient room temperature. Note: The temperature range is from 15ºC to 28ºC.
-
Page 13: Wall Mounting And Attaching The Wheels
Wall Mounting and Attaching the Wheels Wall mounting 1.Before wall mounting your heater, remove the wheels. 2.Mark the screw location on the wall, approximately 1 metre from the floor. Note: The heater must be fixed no lower than 6.5cm above the floor and no higher than 1.8 metres above the floor. -
Page 14: Care And Cleaning
Care and Cleaning Ensure that the heater is switched off and disconnected from the power outlet before cleaning. Carefully wipe the exterior of the heater with a soft damp cloth and dry thoroughly with a dry cloth. Over time, dust may accumulate on the front grille. - Page 15 ‘Sunbeam’, is a registered trademark of Sunbeam Corporation. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. Backed by Sunbeam’s 3 Year Replacement Guarantee and National Service Network. ©...
- Page 16 Consumer Hotline Australia 1800 025 059 New Zealand 0800 786 232 www.sunbeam.com.au is a registered Trademark of Sunbeam Corporation Limited. ABN 45 000 006 771. © Sunbeam Corporation Limited 2006.