Table of Contents
Advertisement
o
You can move the Size slider to change the size of the On-Screen Control when it
appears on your screen.
o
You can select Display at Cursor if you want the On-Screen Control to appear
next to your cursor when you open it. If you do not select this, the On-Screen
Control appears in the same location every time you open it.
6. Click OK.
o
The On-Screen Control that you just created appears in the Panels list on the On-
Screen Controls tab.
7. Assign settings to your
Tip: You can create an On-Screen Control and then switch the layout whenever you want.
From the Panels list, select the On-Screen Control that you want to change.
Click
to edit.
Select a new layout, and click OK.
If you switch to an On-Screen Control that has fewer settings than your original one, your
settings are not lost. For example, if you create a Keypad and then change it to a Radial Menu,
your first eight settings display in the Radial menu. If you switch back, all of your original
Keypad settings are still there.
Assign settings to Radial Menus and Screen
Keys
After you
create a Radial Menu or Screen Key
and slices. You can change the settings at any time if you decide that you want different settings.
Radial Menus, Screen Keys
panel, you need to assign settings to the buttons
and Keypads.
Advertisement
Table of Contents
