Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
NI TB-2630
Terminal Block for the NI PXI-2530
This guide describes how to install and connect signals to the
National Instruments TB-2630 terminal block to configure your
NI PXI-2530 switch module as one of the following:
•
•
•
•
Refer to the NI Switches Getting Started Guide to determine when to install
the terminal block.
Introduction
The TB-2630 terminal block installs in front of the PXI-2530 switch
module. The TB-2630 has ribbon cable headers to connect signals to the
switch. Screw terminals for the trigger input and trigger output signals also
are available.
Conventions
The following conventions are used in this guide:
»
The » symbol leads you through nested menu items and dialog box options
to a final action. The sequence File»Page Setup»Options directs you to
pull down the File menu, select the Page Setup item, and select Options
from the last dialog box.
This icon denotes a note, which alerts you to important information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
128 × 1 1-wire multiplexer
64 × 1 2-wire multiplexer
32 × 1 4-wire multiplexer
Eight 16 × 1 1-wire multiplexers
Advertisement
Table of Contents
