Using your fingers, remove the failed processor.
8.
CAUTION:
To avoid damage to the system board:
Do not touch the socket contacts.
•
Always install the processor socket cover after removing the processor from the socket.
•
•
Do not tilt or slide the processor when removing the processor from the socket.
CAUTION:
To avoid damage to the processor:
•
Handle the processor only by the edges.
Do not touch the bottom of the processor, especially the contact area.
•
Remove the personality board assembly (on page 37).
9.
Disconnect all cables from the system board.
10.
Remove the failed system board.
11.
Removal and replacement procedures 40