Turning Off The Main Power; Saving Energy - Ricoh Pro C901 Operating Instructions Manual

1. Getting Started
1. Press the operation switch.
The operation switch indicator goes off.
1
• Even if you press the operation switch, the operation switch indicator does not go out, but blinks in
the following cases:
• During communication with external equipment.
• When the hard disk is active.
• When the internal cooling fan is active.

Turning Off the Main Power

The procedure for turning off the main power varies depending on the machine's configuration. For details,
see the procedure for turning off the machine's printer controller.

Saving Energy

This section explains the machine's energy saving functions.
This machine has the following energy saving functions.
Energy Saver
If you do not use the machine for a certain period after an operation, or when you press the [Energy
Saver] key, the display disappears and the machine goes into Energy Saver mode. When you press
the [Energy Saver] key again, the machine returns to the ready condition. The machine uses less
electricity in Energy Saver mode.
You can change the amount of time the machine waits before switching to Energy Saver mode after
printing has finished or the last operation is performed under Panel Off Timer.
50
BZW030