Sunbeam 32863281 Instruction Manual page 6

USING YOUR COFFEE MAKER'S CONTROLS
CustomBlend™ Knob – This switch controls the
brew strength of coffee before the coffee maker is
turned on to suit your personal preference – mild,
regular or strong.
Power Switch – Switch controls power to the
coffee maker. (Programmable Units Only)
On Light – This light indicates that power is going
to the coffee maker, and the coffee maker is in
normal operating stage.
Clock/Timer Digital Display – The display
shows clock with AM/PM indicator. When the
"BREW" button is pressed, the programmed
brew time is displayed.
Hour – This button advances the hour display for
the clock timer. See the section on "How to set
the Clock" for proper use.
Minute – This button advances the minute display
for the clock and timer. See the section on "How to
set the Clock" for proper use.
Brew – This button allows you to program the coffee
maker up to 24 hours before the desired brewing
time. See the section on "Delaying the Brewing
Cycle" for proper use.
PM Indicator – This light is illuminated when
the clock or "Brew" set time is indicating PM.
Auto Indicator – This light is illuminated when
the unit is in the delayed brewing cycle mode.
Power Switch – This switch controls three power
modes: ON/OFF/AUTO. The "OFF" mode does not
have a light indicator.
HOW TO SET THE CLOCK
To set the correct time of day, first press the "Hour"
Button until the correct hour has been reached.
Then, press the "Minute" Button until the correct
minutes have been reached. Use the AM/PM
indicator on the left side of the digital read out
when setting the time.
NOTE: Unplugging the unit will reset
the clock to 12:00.
USING YOUR COFFEE MAKER'S CONTROLS
(Programmable Units Only)
PM
Auto
Hour Min
To preset your coffee maker to brew at a later time
first verify that the clock is set to the correct time.
See section on "How to Set the Clock". The clock
must be set before unit is operational.
Press and hold the "Brew" Button. While continuing
to hold the "Brew" Button, press the "Hour" Button
until the desired brew time hour is reached. Then
press the "Minute" Button until the desired minute
has been reached. Release the "Brew" Button.
Turn the Power Select switch to the "AUTO" position.
The "AUTO" light will illuminate, indicating that the
coffee maker is waiting for the preset brew time to be
reached before it will begin the brewing cycle.
USING YOUR COFFEE MAKER'S CONTROLS
(Auto-Off Units Only)
Automatic Shut-Off
On
On Button – This button turns the unit "ON".
The light indicates when the unit is energized.
After 2 hours the unit will turn itself off. To restart
simply turn the unit "Off" then "On" again.
OFF Button – This button turns the coffee maker
"OFF". The button doesn't have a light indicator.
6
Auto Off On
CustomBlend
Brew
Off
CustomBlend