1. Manuals
  2. Brands
  3. Stanley Manuals
  4. Door Opening System
  5. Dura-Glide 2000AG Series
  6. Installation instructions, quick reference manual

Stanley Dura-Glide 2000AG Series Installation Instructions, Quick Reference Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Stanley Access Technologies
Quick-Reference Guide
Dura-Glide™ 2000AG All-Glass Sliding Door
Prohibition on Copying
Any unauthorized reproduction, disclosure or distribution of copies by any person of any
portion of this work may be a violation of copyright law of the United States of America
and other countries, could result in the awarding of statutory damages of up to $250,000
(17 USC 504) for infringement, and may result in further civil and criminal penalties. All
rights reserved.
Installation Instructions
Quick-Reference Guide
203729
Rev. E, 11/20/2018

Advertisement

Table of Contents
loading

Related Manuals for Stanley Dura-Glide 2000AG Series

Summary of Contents for Stanley Dura-Glide 2000AG Series

  • Page 1 Stanley Access Technologies Quick-Reference Guide Dura-Glide™ 2000AG All-Glass Sliding Door Installation Instructions Quick-Reference Guide 203729 Rev. E, 11/20/2018 Prohibition on Copying Any unauthorized reproduction, disclosure or distribution of copies by any person of any portion of this work may be a violation of copyright law of the United States of America and other countries, could result in the awarding of statutory damages of up to $250,000 (17 USC 504) for infringement, and may result in further civil and criminal penalties.

  • Page 2: Table Of Contents

    Attachment 1, Documents, Definitions, Special Tools, Equipment, Materials, and Consumables ....16 Attachment 2, Glass Panel Specifications ......................17 Attachment 3, Replacement Parts ........................18 203729 Rev. E, 11/20/18 1 of 18 © 2018, THE STANLEY WORKS. ALL RIGHTS RESERVED.

  • Page 3: Purpose

    Figure 1. Figure 1. All-Glass Door Applicability This manual is applicable to the Stanley Dura-Glide 2000AG Series sliding door system. This manual does not cover retrofit of an existing door system. 203729 Rev. E, 11/20/18 2 of 18 ©...

  • Page 4: Prerequisites

    • A listing of the documents, special tools and equipment, materials, and consumables used in this procedure. Attachment 3 replacement parts list has been reviewed. 203729 Rev. E, 11/20/18 3 of 18 © 2018, THE STANLEY WORKS. ALL RIGHTS RESERVED.

  • Page 5: Installation Instructions

    These instructions are intended to supplement the other installation instructions supplied with this package. Installing the Header and Jambs 3.1.1 Refer to Stanley Access Technologies document No. 203590, “Dura-Glide 2000 Installation Manual,” and INSTALL the header and jambs. Installing the Top and Bottom Rails onto the Glass Panel WARNING To prevent injury, two people are required to lift and handle the glass panels.

  • Page 6: Installing The O-Panel Breakout Switch

    (EVENLY TORQUE TO 80 IN-LBS) DETAIL A: RAIL ATTACHMENT AG010 Installing the O-Panel Breakout Switch 3.3.1 Refer to Stanley Access Technologies document No. 203590, “Dura-Glide 2000 Installation Manual,” and INSTALL the O-panel breakout switch. 203729 Rev. E, 11/20/18 5 of 18...

  • Page 7: Installing The Lag Bolts

    Refer to Section 3.2, and INSTALL top and bottom rails onto O panel glass. 3.5.2 Refer to Figure 3, and INSTALL O-panel pressure-sensitive pile on trailing glass pane. 3.5.3 Refer to Stanley Access Technologies document No. 203590, “Dura-Glide 2000 Installation Manual,” and INSTALL the O-panel(s). 203729 Rev. E, 11/20/18 6 of 18 ©...

  • Page 8: Installing The Sx Panel(S)

    Using the supplied ¼″-20 X 1″ socket head capscrews, SECURE door holder assembly to header. 3.6.3 Refer to Figure 5, and LOOSEN the nuts securing the load wheels and anti-riser wheels to the hanger. 203729 Rev. E, 11/20/18 7 of 18 © 2018, THE STANLEY WORKS. ALL RIGHTS RESERVED.
  • Page 9 SET the anti-riser wheels so that there is a 1/64″ to 1/32″ gap between the top of each wheel and the track. 3.6.11 REPEAT Section 3.6 for the opposite SX panel. 203729 Rev. E, 11/20/18 8 of 18 © 2018, THE STANLEY WORKS. ALL RIGHTS RESERVED.

  • Page 10: Installing The Weatherstripping

    ALIGN the pile so it contacts each other when the panels are in the closed position. ENSURE the pile does not prevent the panels from closing properly. 203729 Rev. E, 11/20/18 9 of 18 © 2018, THE STANLEY WORKS. ALL RIGHTS RESERVED.

  • Page 11: Adjusting The Sx Panels

    The anti-riser adjustment is performed to prevent the door panel from moving upward. The anti-riser track serves as a roller surface for the anti-riser wheels. 3.8.2 ADJUST the anti-risers as follows: 203729 Rev. E, 11/20/18 10 of 18 © 2018, THE STANLEY WORKS. ALL RIGHTS RESERVED.

  • Page 12: Adjusting Belt Tension

    Over long spans, some belt deflection is required. To prevent damage to bearings and gear reducer, belt must not be over-tightened. 3.9.4 IF "Dimension A" is not 2 to 3 inches, PERFORM the following: 203729 Rev. E, 11/20/18 11 of 18 © 2018, THE STANLEY WORKS. ALL RIGHTS RESERVED.

  • Page 13: Adjusting The Full-Open Bumper Stops

    2. During door installation, the breakout detents are set tight to prevent the door from swinging out and being damaged. During door tune-in, the breakout detents must be readjusted. 3.11.1 BREAK OUT panel. 203729 Rev. E, 11/20/18 12 of 18 © 2018, THE STANLEY WORKS. ALL RIGHTS RESERVED.
  • Page 14 With "TOP" indication facing upward, POSITION end cap over hanger. 3.11.9 TIGHTEN fastener securing end cap to detent block. 3.11.10 APPLY pressure-sensitive foam to end cap. 203729 Rev. E, 11/20/18 13 of 18 © 2018, THE STANLEY WORKS. ALL RIGHTS RESERVED.

  • Page 15: Adjusting The Sx Panel Sag

    Figure 11. Adjusting SX Panel Sag 3.13 Wiring the Doorway Holding Beams 3.13.1 Refer To doorway holding beam manufacturer’s instructions and CONNECT doorway holding beam wiring. 203729 Rev. E, 11/20/18 14 of 18 © 2018, THE STANLEY WORKS. ALL RIGHTS RESERVED.

  • Page 16: Installing The Su-100 Motion Sensors

    3.14 Installing the SU-100 Motion Sensors 3.14.1 Refer to Stanley Access Technologies document No. 203957, “SU-100 Motion Sensor Installation and Operation,” and INSTALL the two SU-100 motion sensors. 3.15 Closing Out 3.15.1 Refer to the following and TUNE-IN door: •...

  • Page 17: Attachment 1, Documents, Definitions, Special Tools, Equipment, Materials, And Consumables

    (Sheet 1 of 1) Documents • Stanley Access Technologies document No. 203590, “Dura-Glide 2000 Installation Manual” • Stanley Access Technologies document No. 204003, “MC521 Controller Installation and Operation Manual” • Stanley Access Technologies document No. 203957, “SU-100 Motion Sensor Installation and Operation”...

  • Page 18: Attachment 2, Glass Panel Specifications

    Kgs times the door width (m) divided by 2 shall not exceed 565 Nm Metric Example: If door weight = 100 kg And door width = 1.1 m Then: 100 X 1.1 X 9.8 = 539 Nm 203729 Rev. E, 11/20/18 17 of 18 © 2018, THE STANLEY WORKS. ALL RIGHTS RESERVED.

  • Page 19: Attachment 3, Replacement Parts

    517008-2 (3,M) END CAP-LH- ‘O’ BOTTOM RAIL-AG 411624-4 PER FT. PILE-ADHESIVE BACKED-GRAY 413268 PER FT. SEAL-BRUSH-1 ¼” BLACK AG 413269 PER FT. EXTR –SEAL AG 203729 Rev. E, 11/20/18 18 of 18 © 2018, THE STANLEY WORKS. ALL RIGHTS RESERVED.

Table of Contents