Table of Contents
Advertisement
Installation on vibrating floors
By vibrating floors, especially wooden floors with resilient floor-boards,
a water-proof wooden board of at least 15 mm thickness is firmly scre-
wed on at least 2 floor beams. If possible, install the appliance at a cor-
ner of the room because the wooden floor is best fixed at such a place
that isn't susceptible to resonant vibration.
Levelling on uneven floors
Automatically adjusted foot: The rear right foot of your washing
3
machine includes a telescopic leg. It assures a stable stance for the
appliance, even during high speed spin cycles.
If the washing machine nevertheless does not demonstrate good stabi-
lity, proceed as follows:
1. Set the three adjustable feet to the default dimension of 10 mm. Use
0
the included special key for the removal of transport braces to this end.
If the automatically adjusted foot does not reach to the floor:
2. Manually lengthen the automatically adjusted foot (back right) by the
necessary measure.
Check installation with a water level.
Attention! Never compensate for small areas of unevenness in the
floor through the use of wooden wedges, cardboard or the like. Level-
ling may only be carried out with the adjustable feet.
Installation and Connection Instructions
45
Hide quick links:
Advertisement
Table of Contents
