Taking Your Blood Pressure - Sunbeam HEALTH AT HOME 7623 Instruction Manual

i
1. Place the cuff on the arm that will be used for the measurement
(preferably the left arm). See previous section on proper cuff placement.
'2. Remaih seated or in a reclining position during measurement. Keep the arm
during measurement could cause an error, requiring a second measurement.
3. Press the power button. When the.power'button is pressed, all of the display
symbols will appear for one second. When the "0" is displayed, the monitor is
ready for measurement. If the "A' mark appears, the cuff has some air trapped
in it. Rress the exhaust valve button until "0" appears.
Left Arm
Page 3