Windshield Mounting - Whistler MFU440 User Manual

Windshield Mounting

• Clean the selected area of the windshield for
mounting using a quality glass cleaner.
• Slide detector onto bracket until it locks in place.
• Peel plastic cover off sticky portion of suction cup.
• Press the suction cup onto the windshield.
To secure, press the locking tab toward the
windshield. Important: make sure unit is level.
• Loosen the knob on the bracket to adjust the angle
of the unit to be level with the road. Tighten knob
to secure the unit's position.
Locking
tab
Adjustment
knob
Important: Some newer cars have a plastic safety
coating on the inside of the windshield. The
windshield bracket may leave permanent marks.
Check the vehicles owner's guide or ask your dealer
before applying suction cup mount.
INSTALLATION
Release
tab
Bracket
9