Float System - Robin America R600 Service Manual

5) Float system
Pull out tloat pin (13) and remove float (I 1
j
and needle valve
(,30).
* Avoid using a drill or a wire to clean the fuel passages (they map damage the orifice of the pilot and main jet
nozzles'). Use compressed air.
* The float pin is peen-secured to the carburetor body; the needle valve and float can be removed out from the op-
posite side of the peen-secured part b>- lightly striking the float pin with a thin bar-like object.
27
/
28
24
1'
Fig. 72-29
- 50 -