Esd Precautions; Chapter 4 F2000 Customer Replaceable Units (Crus) - Quantum F2000 User Manual

Chapter 4: F2000 Customer Replaceable Units (CRUs)

ESD Precautions

ESD Precautions

68
The chassis is designed to dissipate all electrostatic discharge (ESD) to
the chassis base. Ensure that there is sufficient electrical and mechanical
connection from the chassis base to the rack rails, and that the rack
itself is tied to earth ground. The unit must be grounded in accordance
with all local/regional and national electrical codes.
Some components within the F2000 array contain static-sensitive parts.
Precautions must be taken to ensure that the system is not exposed to
ESD while handling components or servicing the unit. To avoid
damaging these parts while performing maintenance procedures,
always observe the following precautions:
• Keep static-sensitive parts in their original shipping containers until
ready for installation.
• Do not place static-sensitive parts on a metal surface. Place them
inside their protective shipping bag or on an anti-static mat.
• Wear anti-static wrist bands when unpacking and handling the
units, and avoid touching connectors and other components.
• Dry climates and cold-weather heating environments have lower
relative humidity and are more likely to produce static electricity.
Quantum F2000 User's Guide