Check The System Inventory Of A Canister - Quantum F2000 User Manual

Chapter 3: F2000 Basic Operations

Check the System Inventory of a Canister

Check the System Inventory of a Canister

50
3 Check the state of the components. The example in
FAN0_STATUS and FAN1_STATUS with a state other than Normal,
which indicates a problem with the fans.
You can view the inventory and status of the CPUs and DIMMs in a
canister by viewing the System Inventory page.
To check the status of canister sensors:
1 Access the BMC Web UI for a canister.
Note: Refer to
instructions on how to access and log into the BMC Web
UI.
2 From the BMC Web UI Dashboard, click System Inventory from the
navigation menu.
The System Inventory Information page appears (see
page 51). The Block Diagram view appears by default. There are
four DIMMs installed in each canister. Populated DIMM slots are
shown in green. CPUs are shown in yellow.
Access the BMC Web UI
Figure 36 shows
on page 30 for detailed
Figure 37
Quantum F2000 User's Guide
on