Gas Leak Check; Finishing - Carrier P5 Series Owners And Installation Manual

GAS LEAK CHECK

After connecting the pipe, check the joints for gas leakage with gas leak detector or soapy water.

FINISHING

• Wrap the piping joints with the pipe insulation and fasten it with vinyl tape. ( Figure. 18, 19)
• Fill the gap between the inside of wall sleeve and the pipe with a sealer so that rain and wind does not enter. ( Figure. 20 )
Wall sleeve
Pipe insulation
Pipe
Wall cap
Pipe
Sealer(Putty)
Saddle
(Vinyl tape)
Indoor side Outdoor side
Wall
Figure 20
Figure 18 Figure 19
30