Radio Operation - Clarion M508 Owner's Manual & Installation Manual

Radio Operation

Select Tuner As Playing Source
Press the [ / SRC ] Source button to select the
TUNER mode.
World Tuner
This unit is initially set to USA frequency intervals of
10 kHz for AM and 200 kHz for FM. When using it
outside the USA, the frequency reception range can
be switched to the intervals below.
U.S. A
standard
Frequency
10KHz
spacing
AM
Frequency 530-1710
range KHz
Frequency
200KHz
spacing
FM
Frequency 87.9-107.9
range MHz
Selecting The Radio Band
Press the [BAND] button on the panel to select one
radio band.
[ ] Tuning Down / [
Up Buttons
1. Press the [ ] / [
by step.
2. Press and hold the [
next strongest station.
Recalling a Preset Station
Press one numeric button among 1 to 6 on the front
panel to select the corresponding stored stations.
Preset Scan
Preset scan receives the stations stored in the
preset memory in order. This function is useful when
searching for a desired station in the memory.
1. Press the [MENU] button.
2. Rotate the [VOLUME] knob to select Preset Scan
mode and press [ENTER], When a desired station
is tuned in, press the [MENU] button to continue
receving that station
Recalling a Preset Station
Press one numeric button among 1 to 6 on the front
panel to select the corresponding stored stations.
Europe Asia Australia
standard standard standard
9KHz 9KHz 9KHz
531-1602 531-1620 531-1620
KHz KHz KHz
50KHz 50KHz 100KHz
87.5-108 87.5-108 87.5-108
MHz MHz MHz
] Tuning
] button change intervals step
] / [ ] button to seek the
Auto Store
Only stations with sufficient signal strength will be
detected and stored in the memory.
1. Press the [MENU] button.
2. Rotate the [VOLUME] to select the Auto Store
mode, press the [ENTER] button to start
automatically select six strong stations and store
them into six presets. The new stations replace
any stations already stored in the band.
Manual Store
When one expected radio station has been detected,
press and hold number button 1-6 to store it in the
memory.
Area Set
This option allows you to select the appropriate
frequency spacing for your area.
1. Press and hold the [MENU] button.
2. Press the [ ] / [
3. Rotate the [VOLUME] knob to select: "U.S.A",
"Europe", "Asia", "AUST (Australia)"
4. Press the [ENTER] button to confirm.
] button to select "AREA"
M508
9