Changing The Display - Clarion M508 Owner's Manual & Installation Manual

SiriusXM Satellite Radio Operations
®
Direct Tuning
Short Press the [MENU] button and rotate the
[VOLUME] knob to "Direct Tune" to access the
SiriusXM Direct Tuning mode. Press [ENTER].
1. Press the [ ] or [
location to rotate the [VOLUME] knob to change
the number.
2. Press the [ENTER] button to confirm channel
number selection.

Changing the Display

Text information, such as the channel name, artist
name, song title and content info is available with
each SiriusXM channel. The unit can display this text
information as explained below:
In SiriusXM mode, press the [DISP] button. Each
time you press this button, the display changes as
shown below:
Channel Name->Artist Name->Song Title->Con-
tent Info->Category Name->Clock
Note:
If no text is available, nothing will be displayed.
SiriusXM Signal
Press the [MENU] button to access the SiriusXM
menu.
1. Rotate the [VOLUME] knob to select "SXM
SIGNAL"
SiriusXM Factory Reset
SiriusXM user settings are reset by performing a
RESET of the M508 device as described on page 8.
Note:
When restoring SiriusXM to factory defaults, the follow-
ing settings will be reset or affected:
y Last channel tuned is reset.
y Presets will be restored to factory default settings.
y Parental Control feature will be disabled.
y Mature Channel Tuning will be accessible. Parental
control passcode will be restored to the factory default
setting.
y T h e d i s p l a y s t a t u s w i l l g o b a c k t o t h e
default state.
] buttons to change the digit
11
M508