Sealed Burner Rangetop Care - Wolf SRT484CG Use & Care Information Manual

W O L F S E A L E D B U R N E R R A N G E T O P
C A R E
C O M P O N E N T
Burner Pan
Porcelain enamel
Burner Cap
Matte-finish
porcelain enamel
Burner Grates
Porcelain-coated
cast iron
Control Knobs
Bezels
Powder-coated die
cast zinc
Spark Igniters
Ceramic
22
R E C O M M E N D AT I O N S
C A R E R E C O M M E N D A T I O N
Caution! Do not use abrasive cleaners (e.g., Comet); they will perma-
nently scratch the surface.
Resistant to most stains, but not totally impervious to damage. Salt and
some cooking liquids may pit and stain the surface. Always remove these
spills immediately.
General care: Use a clean cloth or sponge; wipe with warm water and a mild
dish detergent. Rinse and dry immediately.
Spray degreasers: Spray on a cloth and wipe surface to remove fingerprints
and greasy spatters. Buff dry immediately to avoid streaking.
Hard water stains: Use white vinegar and water.
General care: Cool first. Remove grate. Wash caps in warm water and liquid
detergent or mild abrasive cleaners. Foods high in acid or sugar content,
such as milk, tomatoes, sauerkraut, fruit juices or pie filling, may pit or craze
the surface. Remove as soon as possible before heating again.
Remove from the rangetop and place on a flat surface near the sink to clean.
Nonabrasive cleaners: Hot water and liquid detergent, paste of baking soda
and water, plastic pad or sponge.
Mild abrasive and abrasive cleaners: Use sparingly.
To remove the knobs, pull the knobs forward off the valve stem (see page 11
on nylon bearing).
General care: Wipe each knob with a damp cloth and mild soap and water;
rinse and dry. Never soak in water or use abrasive cleaners; they will scratch
the finish and may remove the markings. Do not place in dishwasher.
Hand wash all decorative components of your rangetop. This includes the
knobs, bezels, grates and burner caps. Do not clean any of these components
in the dishwasher.
Keep dry; never spray water or cleaner directly on the igniter. When cleaning
around the surface burner, be careful that the cloth does not catch on the
igniter and damage it.
C A R E