Table of Contents
Advertisement
o
p e r at i o n
In order to descramble scrambled channels a corresponding smart card is
needed.
The channels to be descrambled are set in submenu "station filter".
s
tat i o n
In this menu stations (services) of a transponder can be switched off.
Herein you select which scrambled station should be descrambled using an
adequate CA module (only via tuner "A" and "C").
Ca
w i t h
a
m o d u l e
f i lt e r
Bx 4A
Das Erste
—> All stations from the channel strip will be read, and then displayed
with name and station type.
—> If no station is found, the following message will appear in the dis-
play: "FILTER no Service".
In this case, check the configuration of the antenna system and
head-end station, as well as the previously adjusted settings for the
cassette.
—> The display shows e.g.:
Meaning of the indicators in the example:
"Bx 4A"
"TV"
" + "
"01/06"
"Das Erste"
Further possible terms displayed:
"RA"
" –
"
" *
"
TV +
01/06
Bx 4A TV + 01/06
Das Erste
Slot 4, channel strip "A"
TV channel type
The currently selected station is switched on.
The 1st of 6 stations is being displayed.
Station name
Radio channel type
For radio stations, the background of the screen of the
connected TV or test receiver is darkened.
The currently selected station is switched off.
The star means that the TV or radio station selected is
scrambled. To enable the station, the CA module and
the appropriate smart card of the station provider are
required.
- 25 -
CGS-2 764 C
Advertisement
Table of Contents
