Electrical - General - Strong Pools and Spas RIO Rotational Molded resin whirlpool spa Owner's Manual

Electrical - General Instructions
It is recommended that a licensed electrician install the power to your spa, in accordance with
the National Electric Code or any local electrical codes in effect at the time of installation.
The circuit breaker must be dedicated and cannot be shared with any other appliances. It
should be labeled and easily accessible to users.
TYPE CORDS OF ANY KIND.
Metal surfaces within 5 feet of the spa must be grounded to the spa.
A 120 Volt - 20 Amp GFI rated plug is furnished with the Rio Spa.
CAUTION: This spa will not work if more than one GFCI is used on the circuit.
Two Wire
& Ground
Ground (copper or green)GRD
Connections should be made using copper conductors only. The connecting wire and circuit
breakers or fuses must be sized to accommodate the total ampere load as specified on the
equipment module data label.
Strong Pools and Spas only makes electrical recommendations, always consult a certified electrician.
The use of a shut-off box near the spa is recommended.
Electrical Connections:
Live (black) Hot Black
Neutral (white) Neutral
Hot Red
DO NOT USE EXTENSION OR PLUG-
110/220 Volt Rio
TERMINAL
BLOCK
4