What’s Included Lithium 123 batteries Welcome 100% wireless camera Thank you for choosing Arlo. Getting started is easy. Mounting Magnetic wall screw mount...
Insert Batteries • Unlock the battery • Insert two batteries • Insert two batteries • Close the compartment by sliding near the back of near the battery door. and holding the latch. the camera: compartment hinge: • Slide the battery door back and lift it to open the compartment.
Page 4
Sync Your Camera Sync Your Camera with a Base Station Sync your camera with a base station or with a Nighthawk router. 1. Bring the camera within one to three feet of the base station. To sync with a To sync with a base station, Nighthawk router, go to page 7.
Page 5
2. Press and release the Sync button on the side of the base station. 4. Press and release the Sync button on top of the camera. 3. Wait for the sync status LED to blink green. Cameras must be synced one at a time.
Page 6
1. Launch a web browser from a computer or wireless device that is connected to the router’s network. You’re Done! 2. Type http://www.routerlogin.net. Congratulations! Your Arlo camera is set up and ready to go. To view useful tutorial videos, find troubleshooting tips, or get support, visit http://support.arlo.com.
Page 7
The router locates and downloads the firmware and begins the update. When the upload is complete, your router restarts. If an Arlo menu option displays, you’re all set. Go to page 14. If Arlo is not one of the BASIC menu options, you must update the router’s firmware.
For the best experience, download the Arlo app for your smartphone Launch the app from your smartphone and click the New System by scanning the QR code below or searching for Arlo in the app store. Setup button. Or from a computer, visit https://arlo.netgear.com...
Page 9
To sync your camera: 2. Press and hold the WPS button on the front of the router for three to five seconds. 1. Bring the camera within one to three feet of the router.
Page 10
3. Press and release the Sync button on top of the camera. Cameras must be synced one at a time. Congratulations! Your Arlo camera is set up and ready to go. To view useful tutorial videos, find troubleshooting tips, or get support, visit http://support.arlo.com.