Download Print this page

Cisco ASA 5506-X Configuration Manual page 27

Cli
Hide thumbs Also See for ASA 5506-X:

Advertisement

Chapter 1
Service Policy Using the Modular Policy Framework
Figure 1-3
Mapped Address: 209.165.201.2: port
See the following commands for this example:
hostname(config)# object network obj-192.168.1.2
hostname(config-network-object)# host 192.168.1.2
hostname(config-network-object)# nat (inside,outside) static 209.165.201.1
hostname(config)# object network obj-192.168.1.0
hostname(config-network-object)# subnet 192.168.1.0 255.255.255.0
hostname(config-network-object)# nat (inside,outside) dynamic 209.165.201.2
hostname(config)# access-list serverA extended permit tcp any host 209.165.201.1 eq 80
hostname(config)# access-list ServerB extended permit tcp any host 209.165.200.227 eq 80
hostname(config)# class-map http_serverA
hostname(config-cmap)# match access-list serverA
hostname(config)# class-map http_serverB
hostname(config-cmap)# match access-list serverB
hostname(config)# policy-map policy_serverA
hostname(config-pmap)# class http_serverA
hostname(config-pmap-c)# inspect http
hostname(config-pmap-c)# set connection conn-max 100
hostname(config)# policy-map policy_serverB
hostname(config-pmap)# class http_serverB
hostname(config-pmap-c)# inspect http
hostname(config)# service-policy policy_serverB interface inside
hostname(config)# service-policy policy_serverA interface outside
Applying Inspection to HTTP Traffic with NAT
In this example, the Host on the inside network has two addresses: one is the real IP address 192.168.1.1,
and the other is a mapped IP address used on the outside network, 209.165.200.225. You must use the
real IP address in the ACL in the class map. If you applied it to the outside interface, you would also use
the real address.
HTTP Inspection and Connection Limits to Specific Servers
Server A
Real Address: 192.168.1.2
Mapped Address: 209.165.201.1
Host B
Real Address: 192.168.1.1
Examples for Service Policies (Modular Policy Framework)
Security
appliance
port 80
insp.
inside
Cisco ASA Series Firewall CLI Configuration Guide
insp.
port 80
set conns
Host A
209.165.200.226
outside
Server B
209.165.200.227
1-21

Hide quick links:

Advertisement

loading