Philips QG33 Series Manual page 12

12
English
Precision attachments for use on face
Nose trimming
Nosetrimmer rotary
Detail trimmer
- Make controlled movements against the hair
growth and move it over the part that needs
trimming.
You can use the nose trimmer attachment to trim
your nose hair and ear hair.
- Make sure your nostrils are clean. Make sure
your outer ear channels are clean and free from
wax.
- Do not insert the tip more than 0.5cm and make
controlled movements.
Trimming nose hair:
1 Gently move the tip in and out your nose while
turning it round to remove unwanted hairs.
2 Switch off and clean the appliance after each
use (see 'Cleaning and maintenance').
Trimming ear hair:
1 Slowly move the tip round the ear to remove
hairs that stick out beyond the rim of the ear.
2 Gently move the tip in and out the outer ear
channel to remove unwanted hairs.
3 Switch off and clean the appliance after each
use (see 'Cleaning and maintenance').
You can use the detail trimmer without comb to
create fine lines and contours around your facial
style, close to the skin (to a length of 0.5mm).
1 Hold the detail trimmer perpendicular to the
skin and move it upwards or downwards with
gentle pressure.