Snmp Agent Extension Trap Types; Standard Mib Specifications; Mibs Supported By Snmp Agent - Hitachi VSP 5000 Series Notification Manual

Name
*The object identifier for a failure in a storage system processor would be
.1.3.6.1.4.1.116.5.11.4.1.1.6.1.2.

SNMP Agent extension trap types

SNMP Agent extension trap types are set according to the severity. The character strings
following "RaidEventUser" indicate their severity.
The following table describes the SNMP Agent extension trap types.
Specific Trap
Code
1
2
3
4

Standard MIB specifications

MIBs supported by SNMP Agent

SNMP Agent supports a limited number of MIBs. If you send a GET request for an object
(MIB) that is not supported, you will receive NoSuchName as a GET RESPONSE.
The following table lists MIBs and indicates whether they are supported.
Standard MIB: MIB-II
Object identifier
Trap
RaidEventUserAcute
RaidEventUserSerious
RaidEventUserModerate
RaidEventUserService
MIB
system group
interface group
at group
ip group
icmp group
Chapter 7: SNMP supported MIBs
Hitachi Alert Notification Guide for VSP5000 Series
SNMP Agent extension trap types
Type
Description
All operations in a storage system stopped.
Operation in a component where a failure
occurred stopped.
Partial failure.
Minor failure.
Yes
No
No
No
No
Description
Supported?
44