Odstranjevanje Hladilnika; Prerequisites; Procedure - Dell 3000 Series Service Manual

Hide thumbs Also See for 3000 Series:

Reference and troubleshooting manual (136 pages)

Owner's manual (110 pages)

Service manual (79 pages)

Table Of Contents

Table of Contents

OPOMBA

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your

working inside your

computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

OPOMBA

The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before

you touch it.

POZOR

For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your

skin can reduce the heat transfer capability of the thermal grease.

Teme:

•

Prerequisites

•

Procedure

Prerequisites

1. Remove the battery.

2. Remove the

base

panel.

3. Follow the procedure from step 1 to step 3 in "Removing the

4. Remove the

memory

modules.

5. Remove the

wireless

card.

6. Remove the keyboard.

7. Follow the procedure from step 1 to step 8 in "Removing the

8. Follow the procedure from step 1 to step 8 in "Removing the

Procedure

1. Turn the system board over.

2. In sequential order, as indicated on the heat sink, loosen the captive screws that secure the cooling assembly to the system board.

3. Disconnect the fan cable from the system board.