Odstranjevanje Plošče Gumba Za Vklop; Prerequisites; Procedure - Dell 3000 Series Service Manual

Odstranjevanje plošče gumba za vklop
OPOMBA Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Teme:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the battery.
2. Remove the base panel.
3. Follow the procedure from step 1 to step 3 in "Removing the
4. Remove the keyboard.
5. Follow the procedure from step 1 to step 8 in "Removing the
Procedure
1. Slide the power-button board cable through the slot on the palm rest.
1. power-button board cable
3. palm rest
2. Turn the palm rest over.
3. Remove the screw that secures the power-button board to the palm rest.
4. Slide the power-button board out from the tab on the palm rest.
5. Lift the power-button board, along with its cable, off the palm rest.
computer. After working inside your computer, follow the instructions in
hard drive".
palm rest".
2. slot
Odstranjevanje plošče gumba za vklop
19
After
31