Low Cut Filter Commands - AKG CEQ1/1 Manual

Low Cut Filter Commands

Output Lowcut Filter - Outputs the current state of the Lowcut filter.
Host sends command - 19
Host receives 1 byte: 0 - Lowcut out, 1 - Lowcut in
Set Lowcut Filter - Allows the state of the Lowcut filter to be set. Byte 1 is the Lowcut Filter setting (0-Out, 1-In). Byte 2
is 0 or 1, and indicates whether or not to save the new value to EEPROM.
Host sends command - 20
Host sends 2 bytes: Byte 1: 0 - Lowcut Out, 1 - Lowcut In; Byte 2: 1 - Save to EEPROM, 0 - don't
Host receives 1 byte: 100 to confirm.
CEQ1/1 und CEQ1/1BB
26