Specifications - AKG CEQ1/1 Manual

7. Specifications

EQ In:
Ref Mic In:
Thru Out:
Main Out:
EQ Type:
40Hz to 16kHz
Filter Type:
Cut/Boost Range:
Low Cut Filter:
Pop Suppression Filter (DPS):
Noise (20Hx to 20KHz)
All controls flat:
All controls +12dB:
All controls -12dB:
THD:
Frequency Response:
Maximum Levels
Input:
Output:
Balanced, RF protected, 40k Ohm impedance
Balanced, RF protected, 1.5k Ohm impedance
+15V phantom power (always present)
Parallel to EQ In, provides a pre-EQ output
Balanced, 200 Ohm output impedance
27 band, 1/3 octave, on ISO centers from
Constant-Q, ±3% center frequency accuracy
±15dB
200Hz, 6dB/octave
Dynamic high-pass, maximum filter corner
frequency is 1kHz, 6dB/octave. Threshold
range at 100Hz is -40dBu to 0dBu.
-95dBu
-68dBu
-82dBu
Less than 0.08% (20Hz to 20kHz, +4dBu in)
+0/-3dB, controls flat, 20Hz to 70kHz
+22dBu, controls flat
+22dBu, controls flat
Specifications subject to change without notice.
20
CEQ1/1 und CEQ1/1BB