7.4 Console Management
You can manage the SNMP IPv6 through the LOCAL port. Please use an RJ45 to
DB9 cable to connect the SNMP IPv6's LOCAL port and your workstation's COM
port. Make sure both of the DIP switches are set to the OFF position (normal mode).
The baud-rate of the workstation's COM setting should be 2400 bps.
Web Card Main Menu
z
z
+========================+
|
Web Card Main Menu
+========================+
Web Card Version 01.12.11f
MAC Address 00-30-ab-26-b1-b4
[1].User Manager
[2].TCP/IP Setting
[3].Network Parameter
[4].Time Server
[5].Soft Restart
[6].Reset All To Default
[d].Device Communication
[z].Exit Without Save
[0].Save And Exit
Please Enter Your Choice =>
User Manager
z
z
+========================+
User Manager
|
+========================+
RADIUS
[1].RADIUS Auth: Disable
[2].Server:
[3].Secret:
[4].Port:
----------------
Local Auth
Administrator
[5].Account:
[6].Password:
[7].Limitation: Only in This LAN
Device Manager
[8].Account:
[9].Password:
[a].Limitation: Only in This LAN
Read Only User
[b].Account:
[c].Password:
[d].Limitation: Allow Any
[0].Back To Previous Menu
Please Enter Your Choice =>
Infrasuite Power Management
|
|
1812
admin
********
device
********
user
********
2 0