User Interface; Spmpc Software; Description - GE SPM Series Instruction Manual

4 USER INTERFACE

4 USER INTERFACE 4.1 SPMPC SOFTWARE
This chapter provides all the necessary information to install and/or upgrade a previous installation of the
SPMPC software, and write/edit setpoint files.
The SPMPC software is only compatible with firmware versions 200 and higher.
NOTE
The following sections are included in this chapter:
• System requirements
• SPMPC software version for previous installation check
• SPMPC software installation/upgrade procedure
• SPMPC software system configuration
• Creating/Editing/Upgrading/Downloading Setpoint Files
• Printing Setpoints and Actual Values
• Using Trending
The following minimum requirements must be met for the software to operate properly.
Processor: minimum 486, Pentium recommended
Memory: minimum 4 MB, 16 MB minimum recommended (540 K of conventional memory)
Hard Drive: 20 MB free space required before installation of PC program.
O/S: minimum Windows 3.1, Windows NT or Windows 95/98/2000 recommended
Windows 3.1 Users must ensure that SHARE.EXE is installed.
If a version of the SPMPC software is currently installed, note the path and directory name as this information
will be needed when upgrading.
GE Power Management SPM Synchronous Motor Protection & Control

4.1 SPMPC SOFTWARE

4.1.1 DESCRIPTION

4-
4
1