Honda Click 125i 2017 Owner's Manual page 62

Engine Oil Adding Engine Oil
u
Adding Engine Oil
If the engine oil is below or near the lower
level mark, add the recommended engine oil.
P. 98
2
1. Remove the oil fill cap/dipstick. Add the
recommended oil until it reaches the upper
level mark.
Place your scooter on its centre stand on
u
a firm, level surface when checking the
oil level.
Do not overfill above the upper level
u
mark.
Make sure no foreign objects enter the
u
oil filler opening.
Wipe up any spills immediately.
u
2. Securely reinstall the oil fill cap/dipstick.
NOTICE
Overfilling with oil or operating with insufficient oil can
cause damage to your engine. Do not mix different brands
and grades of oil.
58
For the recommended oil and oil selection
guidelines, see "Maintenance Fundamentals."
P. 41
2
Changing Engine Oil, Cleaning
Strainer Screen
Changing the oil and cleaning the strainer
screen requires special tools. We recommend
that you have your scooter serviced by your
dealer.
1. If the engine is cold, idle the engine for 3
to 5 minutes.
2. Turn the ignition switch to the OFF
position and wait for 2 to 3 minutes.
3. Place your scooter on its centre stand on
a firm, level surface.
4. Place a drain pan under the drain bolt and
oil plug.