Cnfg - Configure Board Information Block - Motorola MVME2700 Series Installation And Use Manual

CNFG and ENV Commands
CNFG – Configure Board Information Block
6
6-2
Use this command to display and configure the Board Information Block,
which is resident within the NVRAM. The Board Information Block
contains various elements that correspond to specific operational
parameters of the PowerPC board. The board structure for the MVME2700
is as shown in the following example:
Board (PWA) Serial Number = "2717994
Board Identifier
Artwork (PWA) Identifier
MPU Clock Speed
Bus Clock Speed
Ethernet Address
Local SCSI Identifier
System Serial Number
System Identifier
License Identifier
The parameters that are quoted are left-justified character (ASCII) strings
padded with space characters, and the quotes (") are displayed to indicate
the size of the string. Parameters that are not quoted are considered data
strings, and data strings are right-justified. The data strings are padded
with zeroes if the length is not met.
The Board Information Block is factory-configured before shipment.
There is no need to modify block parameters unless the NVRAM is
corrupted.
Refer to the MVME2600/2700 Series Single Board Computer
Programmer's Reference Guide (applicable to the MVME2700) for the
actual location and other information about the Board Information Block.
Refer to the PPCBug Firmware Package User's Manual for a description
of CNFG and examples.
= "MVME2700
= "01-w3287F01B
= "233
= "067
= 08003E25C4C9
= "07"
= "1463725
= "Motorola MVME2700
= "12345678 "
Computer Group Literature Center Web Site
"
"
"
"
"
"
"