Download Print this page

Fluke FiberInspector Pro FI-7000 Getting Started Manual page 2

Video probe

Advertisement

Do not connect this equipment to public communications networks, such as tele-
j
phone systems.
Conformite Europeene. Conforms to the requirements of the European Union and
P
the European Free Trade Association (EFTA).
)
Listed by the Canadian Standards Association.
Conforms to relevant Australian standards.
«
Conforms to relevant Russian standards.
EMC approval for Korea.
Class A Equipment (Industrial Broadcasting & Communication Equipment).
This product meets requirements for industrial (Class A) electromagnetic wave equip-
ment and the seller or user should take notice of it. This equipment is intended for
use in business environments and is not to be used in homes.
This Product contains a lithium-ion battery. Do not mix with the solid waste stream.
Spent batteries should be disposed of by a qualified recycler or hazardous materials
handler per local regulations. Contact your authorized Fluke Service Center for recy-
cling information.
This key turns the Product on and off.
WSafety Information
To prevent possible fire, electric shock, or personal injury:
Read all safety information before you use the Product.
Carefully read all instructions.
Do not open the case. You cannot repair or replace parts in the
case.10
Do not modify the Product.
Use only replacement parts that are approved by Fluke Networks.
Do not use the Product around explosive gas, vapor, or in damp or
wet environments.
Use this Product indoors only.
Use the Product only as specified, or the protection supplied by the
Product can be compromised.
Do not use and disable the Product if it is damaged.
Do not use the Product if it operates incorrectly.
Batteries contain hazardous chemicals that can cause burns or
explode. If exposure to chemicals occurs, clean with water and get
medical aid.
2
W
X
Warning

Advertisement

loading