Select Treatment Based Or Cycle Based Program Mode; Select Therapy Type - Fresenius Medical Care Liberty Select User Manual

3 Select Treatment based or Cycle based program mode

The "My Settings" screen displays your available therapy
options.
Touch the program mode your prescription is based upon:
Cycle based or Treatment based. A large 'X' will indicate
the selected program mode.
Treatment Based means that you set your total treatment
time. Your cycler will deliver your treatment in the
specified amount of time. This program mode is useful for
patients that need to finish treatment by a certain time in
order to meet obligations such as going to work.
Cycle Based means that your cycler will always dwell for
the amount of time you set. Your total treatment time may
vary depending on how you drain and fill or if you have
any alarms.
Patients may experience fewer drain complication alarms
using Treatment Based than Cycle Based therapy. If you
are in Cycle Based therapy and experiencing drain
complications you may want to discuss switching therapy
types with your doctor, practitioner, or PD nurse.

4 Select therapy type

Touch the button matching your prescribed treatment. You
will then move to the corresponding screen. Turn to the
corresponding page listed below:
 CCPD: Treatment Based—Turn to page 56
 CCPD: Cycle Based—Turn to page 58
 IPD: Treatment Based—Turn to page 60
 IPD: Cycle Based—Turn to page 62

PD+: Treatment Based—Turn to page 64
 PD+: Cycle Based—Turn to page 66
 TIDAL: Treatment Based—Turn to page 68
 TIDAL: Cycle Based—Turn to page 72
See page 136 for information on the different therapy types.
Liberty Select Cycler User's Guide
Warning: The values and selections shown in
pictures here are for example only. You must enter
the values prescribed by your doctor or
practitioner; see "My Treatment Settings," page 6.
P/N 480145 Rev A 55